JLC Temp — 3D Printing Material

JLC Temp prints in Light Yellow with an accuracy of ±0.2mm or 0.3%.

Specifications

Material nameJLC TempMaterial codeTMPCategoryresinColourLight YellowAccuracy±0.2mm or 0.3%Heat deflection101°CDensity1.3 g/cm3Price per gram$0.113 per gramStarting price$0.25 per partProduction timeAbout 4 days productionMaximum parts per order10000

Where it is used

Functional parts, tooling, mechanical structures, mold components and wind-tunnel test pieces.

Strengths

Outstanding heat resistance (better than other resins), high strength and good mechanical properties.

Limitations

Moderate toughness; parts are more brittle after curing.

Mechanical properties

ColorLight YellowHeat Deflection101℃Elongation at Break4%Tensile Strength60Flexural Strength63Impact Strength12

Material library

• 9600 Resin (resin)
• JLC Black (resin)
• LEDO 6060 (resin)
• 8001 (resin)
• Grey (resin)
• JLC Full Color Resin (resin)
• X Resin (resin)
• CBY (resin)

How to order custom 3D printing

• Samples start from 1 piece so the print can be approved before a bulk run.
• Bulk pricing tiers start at 10 pieces and step down again at higher quantities.
• A proof is sent for approval before the batch is produced.
• Upload STL, STEP, STP, OBJ, 3MF, GLB or GLTF. Up to 20 files per request, 100 MB per file.
• Keep walls above 1.2 mm and never below 0.8 mm for a reliable, printable part.
• Your files stay confidential and are used only to quote and print your order.
• Printed in our own factory, so no tooling is required and MOQ stays low.
• Shipped worldwide by express courier, air or sea freight with tracking.

All materials · Printing processes · Upload a file for a quote