Custom 3D printed trophies let a one-off award shape be created and then repeated for an event, with names, dates and categories printed or engraved per piece.
Award shapes are modelled to the brief, then printed in resin for a smooth, dense finish. Names, dates, placing and sponsor logos can be embossed into the surface or engraved after printing.
Because there is no mould, a unique trophy can be produced for a single event and repeated later, which is difficult with cast or machined awards.
| SLA - Stereolithography | 0.05 - 0.1 mm layer height | accuracy +/-0.1 mm | minimum wall 0.8 mm (recommended >= 1.2 mm) |
|---|---|
| SLS - Selective Laser Sintering | 0.1 - 0.12 mm layer height | accuracy +/-0.3% | minimum wall 1.0 mm |
| MJF - Multi Jet Fusion | 0.08 mm layer height | accuracy +/-0.3 mm | minimum wall 1.0 mm |
| FDM - Fused Deposition Modeling | 0.16 - 0.3 mm layer height | accuracy +/-0.2% | minimum wall 1.2 mm |
| Metal SLM / DMLS | 0.02 - 0.05 mm layer height | accuracy +/-0.1 mm | minimum wall 0.5 - 1.0 mm |
Yes. Send the text list and each trophy is personalised during production, either embossed into the surface or engraved afterwards.
Yes. Event packs start from 10 units and are quoted per piece, with express scheduling when the ceremony date is close.
Yes. Because 3D printing needs no mould, a one-off award design is practical, and the same design can be reordered for later events.
Resin trophies are sanded smooth and can be left raw or painted. Metallic-look coatings are available so the piece reads like a metal award.
Resin awards are lighter than cast metal or glass, which reduces shipping cost and makes them safer to hand out. The sample can be weighed so the exact figure is known.
Place the order as soon as the design is fixed. Personalisation adds a step per piece, so earlier ordering leaves room for express scheduling if needed.
Start a custom 3D order · Material library · Printing processes · Engineering parameters · Gallery · Ready-to-order 3D printed products